Nigeria 50tph Gold Wash Plant Project Complete Gold Mining Equipment

Product Description

Nigeria 50tph Gold Wash Plant Project Complete Gold Mining Equipment

Our factory is the leading mining equipments manufacturer who have over 30 years experience in mining field. We produce full sets mining equipments for processing and separating gold, copper, tin, iron, zircon, rutile, monazite, tungsten, cassiterite, chrome, coltan, manganese, ilmenite, chromite, tantalum, niobium, barite and so on.

Main equipments include Trommel, Rotary scrubber, Jig machine, Spiral chute, Shaking table, Magnetic separator, Electrostatic separator, Jaw crusher, Ball mill, Hammer crusher, Double roller crusher, Vibrating screen, Mercury amalgamation, Gold smelting furnace, Diamond washing machine, Gold pan, Drier machine and so on.
 

Complete Mining Plants for Different Minerals Separation
Coltan	Diamond	Zircon sand
Tantalum	River sand gold	Titanium
Cobalt	Alluvial gold	Tin /Cassiterite
Tungsten	Rock stone gold	Heavy minerals sand
Tantalite	placer gold	Chromium ore
Silica sand	Gold tailing	Monazite
Copper	Clay gold mining	Tungsten ore
Barite	Desert sand gold	llmenite
Chrome	Quartz	Wolfram ore
Iron ore	Coal	Niobium
Manganese ore	Sand gravel	Rutile
Fluorite	Topsoil	Hematite

 

Product Description

 

Basic Process for Above Flowchart

Raw ores are feeded into grizzly feeding hopper by excavator and enter into trommel screen,with the operation and scrubbing by the high pressure water in trommel, ores with clays and silts was broken up,big coarse ore was discharged from tails of trommel and fine ore discharged into jig machine via steel chute or steel pipes.
After rougher and clear concentration of jig machine,grass mat on sluice box catches and collects the useful ore out of tailings which from jig machine,and concentrates from jig machine was further concentrated by shaking table, magnetic minerals (iron ore,ilmenite ore etc.) on gold concentrates was separated by magnetic separator,then with amalgamation and furnace,the pure gold comes out.
PS:jig machines will be replaced by centrifugal concentrator according to mining condition and customer's requirement. The basically main machines matching are as below according to different mining condition:
a). Washing trommel+Centrifugal concentrator+Shaking table;
b). Washing trommel+Jig machine(Jigger)+Shaking table;
c). Washing trommel+Sluice box with grass mat(carpet).

Of course it will be more support equipment according real mining situation.
 

Most machines in above plants are also suitable for alluvial sand gold diamond tin tungsten iron ore concentration.

Successful Case:

150T/H alluvail gold processing plant at Cote D'ivoire
An Africa customer is planning to build a small alluvial gold processing production line. After the joint efforts of our business and engineering team, we successfully help the customer build a 150-ton per hour alluvial gold washing and screening production plant.
Location:Cote Divoire,Africa
Capacity:150t/h

Main machines :Trommel screen,jig machine,shaking table,sluice box
Auxiliary equipment: Vibrating feeder, belt conveyors
The design of this project is simple and the selected equipment is mature and stable. all of the products are provide by Gelin. After 18 working days of production in the Chinese factory, it is delivered on time. The post-installation and commissioning work progressed smoothly. It was successfully put into operation at the end of November, final gold content rate satisfies the needs of customer.

 

Above is for reference only,we also design different process flowchart depends on customer's actual mining condition.

Related Machines

1.Feed Hopper
Mineral Feed Hopper provides the most efficient and economical method of conveying bulk materials such as biomass, with the ease of controlling feed rate. Feeders satisfy a range of applications from light-duty food and chemical to heavy-duty quarry applications in a cost effective way. Normally the machine is mainly used in mining field.
1.The hopper can be installed with different size grizzly bar to filter given size materials.
2.Besides the hopper also can be equipped with belt conveyor to transfer the materials to other minerals process machines like crusher,trommel screen etc.
Capacity,grizzly bar size etc could be customized as required.

2.Rotary Drum Scrubber
Rotary scrubber is a special washing equipment for cleaning large and difficult-to-wash materials,like high impurity content and sticky mud.
This machine with two parts: drum scrubber and screen. The drum scrubber is for washing ore, screen is for sieving different size particles after washing.The maximum feed size can reach 200 mm. It mainly carries out preliminary cleaning for raw ore.

Model	Drum Size (mm)	Screen size (mm)	Rotation speed (r/min)	Feeding size (mm)	Water consumption (M3/h)	Water pressure (Mpa)	Capacity (T/h)	Power (Kw)	Weight (T)	Angle of inclination (°)
G1030	Φ1000×3000	0.5-20	25-28	≤100	1.5-4	0.4-0.5	30-50	15	4.8	0.5-10
G1136	Φ1100×3600	0.5-30	25-28	≤100	1.5-4	0.4-0.5	40-60	15	5.2	0.5-10
G1230	Φ1200×3000	0.5-30	23-25	≤100	1.5-4	0.4-0.5	50-70	18.5	5.8	0.5-10
G1430	Φ1400×3000	0.5-30	20-23	≤150	1.5-4	0.4-0.5	60-80	22	6.2	0.5-10
G1545	Φ1500×4500	0.5-30	18-22	≤150	1.5-4	0.4-0.5	70-120	30	6.9	0.5-10
G1560	Φ1500×6000	0.5-30	18-22	≤150	1.5-4	0.4-0.5	80-130	37	8.3	0.5-10
G1845	Φ1800×4500	0.5-30	20-21	≤170	1.5-4	0.4-0.5	90-130	45	11.8	0.5-10
G1860	Φ1800×6000	0.5-30	20-21	≤170	1.5-4	0.4-0.5	100-140	45	12.8	0.5-10
G2060	Φ2000×6000	0.5-30	19-20	≤210	1.5-4	0.4-0.5	120-160	55	14.8	0.5-10
G2265	Φ2200×6500	0.5-30	19-20	≤230	1.5-4	0.4-0.5	160-180	55	16.5	0.5-10

3.Trommel Screen
Trommel screen also known as rotary screen, is a kind of mechanical screen machine for separating mineral ore material, mainly used in the gold wash plant and solid waste treatment industry. The trommel controls the mineral separation by the size of the particles, and the separation precision is high.
Gelin Provide different specifications trommel screen with Stationary and Mobile Type;
Sieve size, Layer quantity, Power type, Wheel type... can be customization as required.

Stationary Type
Model	Capacity (t/h)	Power(kw)	Screen Diameter (mm)	Screen Length(mm)	Input Size (mm)	Output Size (mm)	Dimension(L*W*H)(mm)	Weight (kg)
TW1015	50	3	1000	1500	≤300	0-100	2600×1400×1700	2200
TW1020	100	4	1000	2000			3390×1400×2140	2800
TW1225	160	5.5	1200	2500			4146×1600×2680	4200
TW1530	250	7.5	1500	3000			4460×1900×2820	5100
TW1545	350	11	1500	4500	≤400		5960×1900×3080	6000
TW1848	450	15	1800	4800			6500×2350×4000	7500
TW2055	600	22	2000	5500			7500×2550×4800	9600
TW2265	800	30	2200	6500			8500×2750×5000	12800
Note:above parameter is for reference,Screen Size,Layer,etc can be customized as required

Mobile type
Model	Capacity (t/h)	Wheel	Water pump	Diesel engine/Electric Motor	Drum Dia. (mm)	Drum Length. (mm)	Screen size (mm)	Weight
GL510	5-10	4	include	Alternative	500	1300	<3-20	800
GL615	10-20	4	include	Alternative	600	1500	<3-20	1000
GL715	20-30	4	include	Alternative	700	1500	<3-20	1200
GL815	30-40	4	include	Alternative	800	1500	<3-20	1500
GL1020	40-100	4	include	Alternative	1000	2000	<3-20	2300
GL1225	100-160	4	include	Alternative	1200	2500	<3-20	4000
GL1530	150-200	4-6	include	Alternative	1500	3000	<3-20	5300
GL1545	200-300	4-6	include	Alternative	1500	4500	<3-20	6100
GL1848	300-450	4-6	include	Alternative	1800	4800	<3-20	7000
GL2055	400-600	4-6	include	Alternative	2000	5500	<2-20	8000
Note:above parameter is for reference,Screen Size,Layer,etc can be customized as required

4.Jig Machine
Jig Concentrator is one of the ideal devices in energy-saving gravity separation, mainly used in the mining industry for ore dressing, such as tungsten, tin, gold,ilmenite, hemtite,rutile sand etc. The maximum feeding particle size is 6-25mm and can be reach 30mm in producing sand ore process.Our jig machine adopts advanced jig technology, reach the leading level.

Model	Chamber		Feeding Size	Hutch water	Water Pressure	Handling Capacity	Motor Power	Dimension	Weight
	Shape	Area (M2)	mm	t/h	kg/cm2	t/h	kw	mm	kg
JT0.57-1	Ladder	0.57	6	1-3	>=0.1	1-2.5	1.5	1550x780x1530	610
JT1-1	Ladder	1.04	10	2-3		2-4	2.2	2270x1110x1890	900
JT1.5-2	Rectangle	1.53	10	1-2		3-8	3	3200x1550x2050	1520
JT2-2	Rectangle	2.28	10	2-4		4-8	3	3225x1550x2050	1640
JT3-1	Ladder	3.3	10	3-6		6-10	5.5	3180x2000x2600	3260
JT4-2	Rectangle	4.33	30	4-8		10-15	7.5	3600x1850x2600	4600
JT5-2	Ladder	4.86	10	4-10		10-15	7.5	3600x2000x2600	4500
JT1.5-2S	Rectangle	1.53	30	1-5		3-8	1.5x2	3200x1550x2050	1590
JT2-2S	Rectangle	2.28	30	2-4		4-8	3x2	3225x1550x2050	1700
JT3-2S	Rectangle	3	30	1-6		6-15	5.5x2	3560x2030x2600	3260
JT4-2S	Rectangle	4.33	30	4-8		10-20	4x2	3600x1850x2600	4660
JT5-2S	Ladder	4.86	30	4-10		10-20	5.5x2	3600x2000x2600	4700
JT6-3S	Rectangle	6	30	1-3		15-30	7.5x2	4600x2000x2600	5900
Note: With the amount of recharge capacity and size to the ore, ore properties and operating conditions vary.

5.Centrifugal Separator
Centrifugal Separator is a kind of gravity concentrating machine. It will produce big centrifugal force when rotating, and strengthen gravity process, to make the superfine particle effectively recover. It can be extremely effective to sorting monomer gold of vein gold ore proved by test. In addition, it can be used for recycling the monomer gold in gold ore and other metals.

TYPE	STLB20	STLB30	STLB60	STLB80	STLB100	STLB120
Capacity(T/H)	0.2-0.3	2-3	10-15	35-45	60-100	80-120
Particle size(mm)	0-3	0-4	0-6	0-6	0-6	0-6
Feeding concentartion(%)	0-50%	0-50%	0-50%	0-50%	0-50%	0-50%
Back wash water(T/H)	1.5-2	4-6	10-15	17-25	50-100	100-120
Output(kg/time)	2-3	10-20	30-40	60-70	70-80	80-100
Discharge cycle(H)	1-4	1-4	1-4	1-4	1-4	1-4
Power (kw)	0.75	1.5	5.5	11	15	30
Rotary speed(r/min)	800	600	460	400	360	300
Pressure water(Mpa)	0.05	0.05-0.1	0.1-0.15	0.1-0.18	0.1-0.2	0.15-0.2
Weight(T)	0.25	0.5	1.2	1.5	2.5	3.2
Approximately dimension(mm)	790X785X790	1180X1140X1250	1970x1670X1750	2300X1800X2200	2500X2000X2400	2500X2350X2500

6.Shaking Table
Shaking Table is one of the main equipments of gravity concentration.It is applicable for separations of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal, precious metal , coal and other minerals. It can carry out ore concentration operation independently and also can operate in conjunction with jig, screw separator, centrifugal separator and other equipment.

Model		6s -7.6	6s- 7.6	6s-  7.6	6s-  4.08	6s-  1.95	6s-  0.5
Deck Type		Coarse Ore Deck	Fine Sand Deck	Slurry/Slime Deck	Three Deck Types Available
Beneficiation Area m^2		7.6	7.6	7.6	4.08	1.95	0.5
Deck Size(mm)	Length (mm)	4450	4450	4450	3000	2100	1100
	transmission end width (mm)	1855	1855	1855	1320	1050	500
	Concentrate end width (mm)	1546	1546	1546	1100	850	430
Maximum Feeding Size (mm)		2	0.5	0.15	Sand--2 Slime--0.1	Sand--2 Slime--0.074	Sand--2 Slime--0.074
Feeding Capacity (ton/hour)		0.8-1.5	0.8-1.5	0.8-1.5	0.4-1.5	0.3-0.8	0.05-0.2
Feeding Density (%)		25-30	20-25	15-25	10-30
Stroke (mm)		16-22	11-16	8-16	6-30	12-28	9-17
Frequency (t/s)		45-48	18-53	50-57	210-320	250-450	280-460
Water added (t/h)		1-3	1-3	1-3	0.4-2	0.2-1	0.1-0.5
Transverse Slope of  Deck (°)		2.3°-4. 3°	1.3°-3.3°	1° -2°	0 -10°	0 -8°	0 -10°
Longitudinal Slope of Deck (°)		1.4	0.92	/	/	/	/
Cross-Section Shape of Deck		rectangle	Saw-Tooth/Indention	Triangle	Rectangle, Saw Tooth, Triangle Available
Motor Power (KW)		1.1	1.1	1.1	1.1	1.1	0.55
Transimission Mechanism		Eccentric Linkage Type
Remark: The tables have three distinct deck designs available.                 - The coarse ore deck is designed for recovering particles size from 0.5mm to 2mm;                 - The fine sand deck is designed for recovering fine particles in the range of 0.074mm to 0.5mm;                 - The slime deck is designed for recovering super extremely fine particles in the range of 0.15mm to 0.074mm.

7.Magnetic Separator
Our factory produces one roller, two rollers, three rollers, four rollers wet type and dry type high intensity magnetic separator and low intensity magnetic separator, magnetic field intensity from 800 gauss to 20000 gauss. The high gradient magnetic separator is a strong magnetic separator for the screening of weak magnetic minerals. Magnetic separators are widely used for separate magnetic iron ore,Tin ore, ilmenite, titanium ore, hematile, manganese, cobalt, cassiterite, coltan,tantalum, niobium, zircon sand, beach black sands, Monazite ore, Rutile ore,silica purify sand and so on.

Model	Drum size  (diameter× length) mm	Magnetic induction Density mT			Capacity		Power Kw	Drum rotation  speed  r/min	Weight Kg
		Magnetic pole geometric centre	Average	Max. magnetic strength	T/h	m 3/h
CTS(N.B)-46	400×600		130	160	1~3	5	1.1	45	600
CTS(N.B)-66	600×600		145	170	5~10	16	1.1	40	705
CTS(N.B)-69	600×900		145	170	8~15	24	1.1	40	830
CTS(N.B)-612	600×1200		145	170	10~20	32	2.2	40	990
CTS(N.B)-618	600×1800		145	170	15~30	48	2.2	40	1330
CTS(N.B)-712	750×1200	120	155	180	15~30	48	3	35	1500
CTS(N.B)-718	750×1800	120	155	180	20~45	72	3	35	2100
CTS(N.B)-918	900×1800	148	165	190	25~55	90	4	28	2900
CTS(N.B)-924	900×2400	148	165	190	35~70	110	4	28	3500
CTS(N.B)-1018	1050×1800	148	165	190	40~75	120	5.5	22	4000
CTS(N.B)-1021	1050×2100	160	240	280	45~88	140	5.5	22	4500
CTS(N.B)-1024	1050×2400	160	240	280	52~100	160	5.5	22	5000
CTS(N.B)-1030	1050×3000	160	240	280	65~125	200	7.5	22	6200
CTS(N.B)-1218	1200×1800	160	240	280	47~90	140	5.5	19	5800
CTS(N.B)-1224	1200×2400	160	240	300	82~120	192	7.5	19	6200
CTS(N.B)-1230	1200×3000	160	240	280	80~150	240	7.5	19	7200
CTS(N.B)-1530	1500×3000	180	240	300	90~170	270	11	14	8100
CTS(N.B)-1540	1500×4000	180	240	300	115~220	350	11	14	9300
* CTS is suitable for the roughing and cleaning of particle size in 6-0mm; semi-backflow type * CTN is suitable for the cleaning and scavenging of fine particle size in 0.6-0mm , and for heavy medium in coal;backflow type * CTB is suitable for the roughing and cleaning of ores in size of 0.5-0mm, especially suitable for the cleaning of ores in size of 0.15-0 mm; concurrent flow type

 8.Sluice box with gold carpet
Sluice box with gold carpet for gold is one of the necessary equipment in the processing of gold mining plant for alluvial gold, placer gold, gold sand, etc.It is also called felt, cohesive gold blanket, gold grass mat, gold rush etc. Just as its name implies, it is used for recovering gold. It usually work with trommel screen,jig machine or shaking table for gold recovering. This equipment has the washing and sieving function. The length of washing part and sievinig part can be custom-made.

Sluice Box		Gold Carpet/Sluice Matting
Width: 1000mm Length: 5000mm Or refer to customers' request Q235B for steel chute Steel thickness mm:8mm		The surface material of sluice mat/gold carpet is PE whose chemical name is polyethylene; The back side material is PA which is also called polyamide; Length: 15 meters or as customers' request.

Company Profile

Ganzhou Gelin Mining Machinery Co., Ltd is an over 30 years professional manufacturer and exporter of mining machinery for crushing, screening, grinding, flotation, magnetic/gravity separation etc. in China.the machines are excellent for processing gold,diamond,iron ore, ilmenite, manganese ore etc. Gelin have a complete service system which can provide customer full service in mining field and after sales service.By now, Gelin's equipments and services are exported to over 60 countries,include America, Russia, India, Africa, Brazil, Chile,South Africa,Zambia etc. Sincerely welcome to visit our factory.

Our Services

One Stop solution for beneficiation plant service:
1.Engineering consulting available,it makes clients have a comprehensive understanding of beneficiation plant,including mine value,useful elements,mineral processing technology,plant scale,essential equipments,etc.

 

2.Arrange mineral beneficiation experiment after received the material sample and beneficiation test report will be done after test.

3.After reaching agreement with client,we start to engineering design,including planning,investigation,data collection, project evaluation etc. and then comes up with design scheme of beneficiation plant construction and working drawings.

 

4.Manufacturing the necessary equipments and arrange the shipment.

 

5.Complete services for Installation and commissioning and technical training(operating training,common problem solving training).

 

After-sale Service

Regularly visit customers to provide after- sale technical supports and to solve problems of beneficiation plant. For equipments supplied,we could provide one-year warranty and provide spare parts with preferential price in the long term and be responsible for any problems with the them.

FAQ

Q: Are you a trading company or a factory?
A: We are a factory at Shicheng county with 110 workers,6 workshops covered 17,000m² and office covered 2,500m². Welcome to visit our factory at anytime.

 

Q: What is your payment terms?
A: By TT(Telegraphic Transfer), 100% or 40% Deposit before production and 60% balance payment paid off before loading from factory.

Q: How long is the guarantee period of your products?

A: The guarantee period is 1-2 years, pls ask staff for more details. And we will supply lifelong technical support service and the spare parts at lowest cost.

 

Q: Is it possible to produce customized products ?
A: Yes, most of our products are produced as required.

 

Q: Is it possible to provide sample for your factory to do ore-dressing experiment?
A: Yes, engineering consulting is available and we'd like to arrange mineral beneficiation experiment after received your sample and provide the test report.