Copper Cobalt Nickel Magnetic Iron Ore Process Machine

Product Description

Our factory is the leading mining equipments manufacturer who have over 30 years experience in mining field. We produce full sets mining equipments for processing copper cobalt Nickel magnetic iron ore,such as Trommel, Rotary scrubber, Jig machine, Spiral chute, Shaking table, Magnetic separator, Electrostatic separator, Jaw crusher, Ball mill, Hammer crusher, Double roller crusher, Vibrating screen, Mercury amalgamation, Gold smelting furnace, Drier machine and so on.

 

Main Equipment

Jaw Crusher
Jaw crusher is composed of bracket, jaw, eccentric shaft, jaw plate, spring, etc. The maximum compression strength of materials to be crushed is 320MPA. PE series jaw crusher is commonly used for primary crushing, and PEX series is used for secondary crushing and fine crushing.
Gelin provides jaw crusher with different types(stationary or mobile type,combination with other machines,Diesel engine or electric motor) and capacities(from 2-800tph) , meeting all customer's requirement.

Model	Feeding Mouth Size	Max Feeding Size	Adjusting Range of Output Size	Capacity	Rotation Speed	Motor Power	Weight	Dimension L*W*H
	mm	mm	mm	t/h	r/min	kw	Ton	mm
PE-200*300	200*300	180	15-50	2-6	260	7.5	1	910*750*990
PE-200*350	200*350	180	18-70	3-10	260	11	1.3	1000*870*990
PE-250*400	250*400	210	20-60	5-20	300	15	2.8	300*1090*1270
PE-400*600	400*600	340	40-100	16-60	275	30	7	730*1730*1630
PE-500*750	500*750	425	50-100	40-110	275	55	12	1980*2080*1870
PE-600*900	600*900	500	75-200	60-200	250	75	20	2290*2290*2400
PE-750*1060	750*1060	630	80-140	115-330	250	110	29	2660*2430*2800
PE-870*1060	870*1060	660	200-260	290-336	250	110	31.5	2810*2430*2800
PE-900*1060	900*1060	685	230-290	160-400	250	110	33	2870*2420*2940
PE-900*1200	900*1200	750	95-165	220-450	200	110	52	3380*2870*3330
PE-1000*1200	1000*1200	850	195-265	315-500	200	110	55	3480*3876*3330
PE-1200*1500	1200*1500	1020	150-300	400-800	180	160	100.9	4200*3300*3500
PEX-150*750	150*750	120	18-48	8-25	320	15	3.8	1200*1530*1060
PEX-250*750	250*750	210	25-60	13-35	330	30	5.5	1380*1750*1540
PEX-250*1000	250*1000	210	25-60	16-52	330	37	7	1560*1950*1390
PEX-250*1200	250*1200	210	25-60	20-61	330	45	8.5	2140*1660*1500
PEX-300*1300	300*1300	250	20-90	16-105	300	75	11	2720*1950*1600

Ball Mill
Ball mill is a key equipment to grind the crushed materials, and the ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc. Besides,it can grind various ores and other materials with dry type and wet type. There are two kinds of ball mill, grate type and overflow type due to different ways of discharging material.

Model	Shell rotation speed (r/min)	Ball load (t)	Feeding size (mm)	Discharging size (mm)	Capacity (t/h)	Motor power (kw)	Weight (t)
Ø600*1200	20-36	0.5	≤20	0.074-0.4	0.2-1	7.5	1.6
Ø900*1800	36-38	1.5	≤20	0.075-0.89	0.65-2	18.5	4.6
Ø900*3000	36	2.7	≤20	0.075-0.89	1.1-3.5	22	5.6
Ø1200*2400	36	3	≤25	0.075-0.6	1.5-4.8	30	12
Ø1200*3000	36	3.5	≤25	0.074-0.4	1.6-5	37	12.8
Ø1200*4500	32.4	5	≤25	0.074-0.4	1.6-5.8	55	13.8
Ø1500*3000	29.7	7.5	≤25	0.074-0.4	2-5	75	15.6
Ø1500*4500	27	11	≤25	0.074-0.4	3-6	110	21
Ø1500*5700	28	12	≤25	0.074-0.4	3.5-6	130	24.7
Ø1830*3000	25.4	11	≤25	0.074-0.4	4-10	130	28
Ø1830*4500	25.4	15	≤25	0.074-0.4	4.5-12	155	32
Ø1830*6400	24.1	21	≤25	0.074-0.4	6.5-15	210	34
Ø1830*7000	24.1	23	≤25	0.074-0.4	7.5-17	245	36
Ø2100*3000	23.7	15	≤25	0.074-0.4	6.5-36	155	34
Ø2100*4500	23.7	24	≤25	0.074-0.4	8-43	245	42
Ø2100*7000	23.7	26	≤25	0.074-0.4	8-48	280	50
Ø2200*4500	21.5	27	≤25	0.074-0.4	9-45	280	48.5
Ø2200*6500	21.7	35	≤25	0.074-0.4	14-26	380	52.8
Ø2200*7000	21.7	35	≤25	0.074-0.4	15-28	380	54
Ø2200*7500	21.7	35	≤25	0.074-0.4	15-30	380	56
Ø2400*3000	21	23	≤25	0.074-0.4	7-50	245	54
Ø2400*4500	21	30	≤25	0.074-0.4	8.5-60	320	65
Ø2700*4000	20.7	40	≤25	0.074-0.4	12-80	400	94
Ø2700*4500	20.7	48	≤25	0.074-0.4	12-90	430	102
Ø3200*4500	18	65	≤25	0.074-0.4	-----	800	137
Note: 1. Above weights for the machines exclude motor 2. Capacity is for reference.

Shaking Table
Shaking Table is one of the main equipments of gravity concentration.It is applicable for separations of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal, precious metal , coal and other minerals. It can carry out ore concentration operation independently and also can operate in conjunction with jig, screw separator, centrifugal separator and other equipment.

Model		6s -7.6	6s- 7.6	6s- 7.6	6s- 4.08	6s- 1.95	6s- 0.5
Deck Type		Coarse Ore Deck	Fine Sand Deck	Slurry/Slime Deck	Three Deck Types Available
Beneficiation Area m^2		7.6	7.6	7.6	4.08	1.95	0.5
Deck Size(mm)	Length (mm)	4450	4450	4450	3000	2100	1100
	transmission end width (mm)	1855	1855	1855	1320	1050	500
	Concentrate end width (mm)	1546	1546	1546	1100	850	430
Maximum Feeding Size (mm)		2	0.5	0.15	Sand--2 Slime--0.1	Sand--2 Slime--0.074	Sand--2 Slime--0.074
Feeding Capacity (ton/hour)		0.8-1.5	0.8-1.5	0.8-1.5	0.4-1.5	0.3-0.8	0.05-0.2
Feeding Density (%)		25-30	20-25	15-25	10-30
Stroke (mm)		16-22	11-16	8-16	6-30	12-28	9-17
Frequency (t/s)		45-48	18-53	50-57	210-320	250-450	280-460
Water added (t/h)		1-3	1-3	1-3	0.4-2	0.2-1	0.1-0.5
Transverse Slope of Deck (°)		2.3°-4. 3°	1.3°-3.3°	1° -2°	0 -10°	0 -8°	0 -10°
Longitudinal Slope of Deck (°)		1.4	0.92	/	/	/	/
Cross-Section Shape of Deck		rectangle	Saw-Tooth/Indention	Triangle	Rectangle, Saw Tooth, Triangle Available
Motor Power (KW)		1.1	1.1	1.1	1.1	1.1	0.55
Transimission Mechanism		Eccentric Linkage Type
Remark: The tables have three distinct deck designs available. - The coarse ore deck is designed for recovering particles size from 0.5mm to 2mm; - The fine sand deck is designed for recovering fine particles in the range of 0.074mm to 0.5mm; - The slime deck is designed for recovering super extremely fine particles in the range of 0.15mm to 0.074mm.

Spiral Separator
GFRP(Glass Fibre Reinforced Plastic) Spiral Separator/Spiral Concentrator is a gravity separation equipment of separation different weight minerals by internal centrifugal force pulp produced in helix turning motion. It's applicable for separation of fine-grained ( including micro-grained ) metallic minerals such as iron, ilmenite, chromite, tungsten-tin ore, niobium-tantalum ore, gold placer, seashore monazite, rutile and zircon as well as other metallic and non-metallic minerals with adequate difference of specific gravity.

Model	Diameter (mm)	Pitch(mm)	Screw Head (piece)	Feeding Size(mm)	Feed Ore Concentration(%)	Capacity(tph)	Dimension(mm)	Weight(kg)
5LL-400	400	240/180	2	2	25-55	0.15-0.3	460*460*1500	50
5LL-600	600	450/360	3	2	25-55	0.8-1.2	700*700*2600	150
5LL-900	900	540/405	4	2	25-55	2-3	1060*1060*4000	400
5LL-1200	1200	720/540	4	2	25-55	4-6	1360*1360*5230	600
5LL-1500	1500	720/540	4	3	25-55	6-8	1560*1560*5230	800
5LL-2000	2000	1200	3	4	30-35	10-40	2120*2120*5600	900

Jig Machine

Jig Concentrator is one of the ideal devices in energy-saving gravity separation, mainly used in the mining industry for ore dressing, such as tungsten, tin, gold,ilmenite, hemtite,rutile sand etc. The maximum feeding particle size is 6-25mm and can be reach 30mm in producing sand ore process.Our jig machine adopts advanced jig technology, reach the leading level.

Model	Chamber		Feeding Size	Hutch water	Water Pressure	Handling Capacity	Motor Power	Dimension	Weight
	Shape	Area (M2)	mm	t/h	kg/cm2	t/h	kw	mm	kg
JT0.57-1	Ladder	0.57	6	1-3	>=0.1	1-2.5	1.5	1550x780x1530	610
JT1-1	Ladder	1.04	10	2-3		2-4	2.2	2270x1110x1890	900
JT1.5-2	Rectangle	1.53	10	1-2		3-8	3	3200x1550x2050	1520
JT2-2	Rectangle	2.28	10	2-4		4-8	3	3225x1550x2050	1640
JT3-1	Ladder	3.3	10	3-6		6-10	5.5	3180x2000x2600	3260
JT4-2	Rectangle	4.33	30	4-8		10-15	7.5	3600x1850x2600	4600
JT5-2	Ladder	4.86	10	4-10		10-15	7.5	3600x2000x2600	4500
JT1.5-2S	Rectangle	1.53	30	1-5		3-8	1.5x2	3200x1550x2050	1590
JT2-2S	Rectangle	2.28	30	2-4		4-8	3x2	3225x1550x2050	1700
JT3-2S	Rectangle	3	30	1-6		6-15	5.5x2	3560x2030x2600	3260
JT4-2S	Rectangle	4.33	30	4-8		10-20	4x2	3600x1850x2600	4660
JT5-2S	Ladder	4.86	30	4-10		10-20	5.5x2	3600x2000x2600	4700
JT6-3S	Rectangle	6	30	1-3		15-30	7.5x2	4600x2000x2600	5900
Note: With the amount of recharge capacity and size to the ore, ore properties and operating conditions vary.

Electrostatic Separator
High tension (High voltage) electrostatic separator is an dry separating equipment in the high voltage electric field, which eliminate the mineral according to the differences of materials electricity nature.

Model	GELIN-ES1	GELIN-ES2	GELIN-ES3	GELIN-ES4	GELIN-ES5	GELIN-ES6	GELIN-ES7	GELIN-ES8
Rollers Qty	2pcs	2pcs	2pcs	2pcs	2pcs	4pcs	4pcs	4pcs
Roll Specification	120*750mm	120*1500mm	165*1500mm	220*1500mm	320*1500mm	165*1500mm	220*1500mm	320*1500mm
Roller speed	0-800r/min	0-800r/min	0-800r/min	0-800r/min	0-500r/min	0-500r/min	0-500r/min	0-500r/min
Working voltage	0-45kv	0-45kv	0-45kv	0-45kv	0-45kv	0-60kv	0-60kv	0-60kv
Motor(kw)	1.1	1.1	1.5	1.5/2.2	3	3/4.4	3/4.4	6
Feed size	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm
Capacity	0.3-1t/h	0.5-2t/h	1-2.5t/h	1-3t/h	2-3t/h	1-4t/h	2-5t/h	4-8t/h
Dimension L*W*H (mm)	1300*800*1800	2100*1000*3100	2100*1250*3100	2100*1330*3100	2100*1500*4500	2100*1330*4500	2100*1500*4500	2100*2800*4500

Disk Electromagnetic Separator
Disk Electromagnetic Separator s a highly efficient device for separation of difficult minerals with various different degree of difference in their magnetic susceptibilities, to produce very fine selectively achieved clean magnetic fractions with highest recovery. sorting mineral size less than 2-3mm of weakly magnetic minerals and rare metal ore selection, it is a very important mineral processing equipment. Normally single disk and three disks available to choose.

Model	3PC-500	3PC-600	3PCX600
Magnetic intensity	1000Gs-17000Gs	1000Gs-18000Gs	1000Gs-20000Gs
Number of disk	3 Pieces	3 Pieces	3 Pieces
Diameter of disk	500mm	600mm	600mm
Rotation Speed of magnetic disk	25-40 r/min	22-38 r/min	22-32 r/min
Power supply	380V	380V	380V
Exciting coil	4 Units	4 Units	4 Units
Matching motor	0.75 KW	1.5 KW	1.5 KW
Exciting power	1.5 kw	1.6 kw	1.6 kw
Coil temperature	65 °C	65 °C	65 °C
Rated current of coil	1.1-1.8 A	1.2-1.9 A	1.2-2.2 A
Duty rating	Continuous	Continuous	Continuous
Feed width	210 mm	300 mm	300 mm
Feed size	≤2 mm	≤2 mm	≤2 mm
capacity	100-500 kg/h	120-800 kg/h	80-800 kg/h
Overall Size	280cm×80cm×122cm	320cm×87cm×116cm	315cm×90cm×125cm
Weight	1900 kgs	2200 kgs	2300 kgs

Magnetic Separator
Our factory produces one roller, two rollers, three rollers, four rollers wet type and dry type high intensity magnetic separator and low intensity magnetic separator, magnetic field intensity from 800 gauss to 20000 gauss. The high gradient magnetic separator is a strong magnetic separator for the screening of weak magnetic minerals. Magnetic separators are widely used for separate magnetic iron ore,Tin ore, ilmenite, titanium ore, hematile, manganese, cobalt, cassiterite, coltan,tantalum, niobium, zircon sand, beach black sands, Monazite ore, Rutile ore,silica purify sand and so on. Please search key word in our shop for more details.

Model	Drum size (diameter× length) mm	Magnetic induction Density mT			Capacity		Power Kw	Drum rotation speed r/min	Weight Kg
		Magnetic pole geometric centre	Average	Max. magnetic strength	T/h	m 3/h
CTS(N.B)-46	400×600		130	160	1~3	5	1.1	45	600
CTS(N.B)-66	600×600		145	170	5~10	16	1.1	40	705
CTS(N.B)-69	600×900		145	170	8~15	24	1.1	40	830
CTS(N.B)-612	600×1200		145	170	10~20	32	2.2	40	990
CTS(N.B)-618	600×1800		145	170	15~30	48	2.2	40	1330
CTS(N.B)-712	750×1200	120	155	180	15~30	48	3	35	1500
CTS(N.B)-718	750×1800	120	155	180	20~45	72	3	35	2100
CTS(N.B)-918	900×1800	148	165	190	25~55	90	4	28	2900
CTS(N.B)-924	900×2400	148	165	190	35~70	110	4	28	3500
CTS(N.B)-1018	1050×1800	148	165	190	40~75	120	5.5	22	4000
CTS(N.B)-1021	1050×2100	160	240	280	45~88	140	5.5	22	4500
CTS(N.B)-1024	1050×2400	160	240	280	52~100	160	5.5	22	5000
CTS(N.B)-1030	1050×3000	160	240	280	65~125	200	7.5	22	6200
CTS(N.B)-1218	1200×1800	160	240	280	47~90	140	5.5	19	5800
CTS(N.B)-1224	1200×2400	160	240	300	82~120	192	7.5	19	6200
CTS(N.B)-1230	1200×3000	160	240	280	80~150	240	7.5	19	7200
CTS(N.B)-1530	1500×3000	180	240	300	90~170	270	11	14	8100
CTS(N.B)-1540	1500×4000	180	240	300	115~220	350	11	14	9300
* CTS is suitable for the roughing and cleaning of particle size in 6-0mm; semi-backflow type * CTN is suitable for the cleaning and scavenging of fine particle size in 0.6-0mm , and for heavy medium in coal;backflow type * CTB is suitable for the roughing and cleaning of ores in size of 0.5-0mm, especially suitable for the cleaning of ores in size of 0.15-0 mm; concurrent flow type

Vibration Feeder
Vibrating Feeder is mainly used to feed materials evenly and continuously into belt conveyor, bucket elevator, screening and crushing equipment before primary crusher, also used for screening fine materials to increase the processing capacity of crusher. The feeding amount can be adjusted flexibly to achieve centralized control and automatic control in the production process. It is applied to crushing and screening production lines on crushing site,in mining,metallurgy,building material ,chemistry, mineral processing,and coal industries.

Model	Max. Input size (mm)	Capacity(tph)	Eccentric shaft speed (r/min)	Installation slope	Power(kw)	Weight(t)
VF2400*800	480	30-80	400-500	0°	7.5	2.8
VF3800*950	520	96-160	500-714	0°	11	4
VF4200*1100	590	120-240	500-800	0°	15	4.7
VF4900*960	550	120-240	500-800	0°	15	5.35
VF4900*1100	620	120-280	500-800	0°	15	5.3
VF5900*1100	650	220-350	500-800	0°	22	6
VF6000*1300	760	400-550	500-800	0°	22	7.5

Rotary Drum Scrubber
Rotary scrubber is a special washing equipment for cleaning large and difficult-to-wash materials,like high impurity content and sticky mud.
This machine with two parts: drum scrubber and screen. The drum scrubber is for washing ore, screen is for sieving different size particles after washing.The maximum feed size can reach 200 mm. It mainly carries out preliminary cleaning for raw ore.

Model	Drum Size (mm)	Screen size (mm)	Rotation speed (r/min)	Feeding size (mm)	Water consumption (M3/h)	Water pressure (Mpa)	Capacity (T/h)	Power (Kw)	Weight (T)	Angle of inclination (°)
G1030	Φ1000×3000	0.5-20	25-28	≤100	1.5-4	0.4-0.5	30-50	15	4.8	0.5-10
G1136	Φ1100×3600	0.5-30	25-28	≤100	1.5-4	0.4-0.5	40-60	15	5.2	0.5-10
G1230	Φ1200×3000	0.5-30	23-25	≤100	1.5-4	0.4-0.5	50-70	18.5	5.8	0.5-10
G1430	Φ1400×3000	0.5-30	20-23	≤150	1.5-4	0.4-0.5	60-80	22	6.2	0.5-10
G1545	Φ1500×4500	0.5-30	18-22	≤150	1.5-4	0.4-0.5	70-120	30	6.9	0.5-10
G1560	Φ1500×6000	0.5-30	18-22	≤150	1.5-4	0.4-0.5	80-130	37	8.3	0.5-10
G1845	Φ1800×4500	0.5-30	20-21	≤170	1.5-4	0.4-0.5	90-130	45	11.8	0.5-10
G1860	Φ1800×6000	0.5-30	20-21	≤170	1.5-4	0.4-0.5	100-140	45	12.8	0.5-10
G2060	Φ2000×6000	0.5-30	19-20	≤210	1.5-4	0.4-0.5	120-160	55	14.8	0.5-10
G2265	Φ2200×6500	0.5-30	19-20	≤230	1.5-4	0.4-0.5	160-180	55	16.5	0.5-10

Company Profile

Ganzhou Gelin Mining Machinery Co., Ltd is an over 30 years professional manufacturer and exporter of mining machinery for crushing, screening, grinding, flotation, magnetic/gravity separation etc. in China.the machines are excellent for processing gold,diamond,iron ore, ilmenite, manganese ore etc. Gelin have a complete service system which can provide customer full service in mining field and after sales service.By now, Gelin's equipments and services are exported to over 60 countries,include America, Russia, India, Africa, Brazil, Chile,South Africa,Zambia etc. Sincerely welcome to visit our factory.

Our Services

One Stop solution for beneficiation plant service:
1.Engineering consulting available,it makes clients have a comprehensive understanding of beneficiation plant,including mine value,useful elements,mineral processing technology,plant scale,essential equipments,etc.

 

2.Arrange mineral beneficiation experiment after received the material sample and beneficiation test report will be done after test.

3.After reaching agreement with client,we start to engineering design,including planning,investigation,data collection, project evaluation etc. and then comes up with design scheme of beneficiation plant construction and working drawings.

 

4.Manufacturing the necessary equipments and arrange the shipment.

 

5.Complete services for Installation and commissioning and technical training(operating training,common problem solving training).

 

After-sale Service

Regularly visit customers to provide after- sale technical supports and to solve problems of beneficiation plant. For equipments supplied,we could provide one-year warranty and provide spare parts with preferential price in the long term and be responsible for any problems with the them.

FAQ

Q: Are you a trading company or a factory?
A: We are a factory at Shicheng county with 110 workers,6 workshops covered 17,000m² and office covered 2,500m². Welcome to visit our factory at anytime.

 

Q: What is your payment terms?
A: By TT(Telegraphic Transfer), 100% or 40% Deposit before production and 60% balance payment paid off before loading from factory.

Q: How long is the guarantee period of your products?

A: The guarantee period is 1-2 years, pls ask staff for more details. And we will supply lifelong technical support service and the spare parts at lowest cost.

 

Q: Is it possible to produce customized products ?
A: Yes, most of our products are produced as required.

 

Q: Is it possible to provide sample for your factory to do ore-dressing experiment?
A: Yes, engineering consulting is available and we'd like to arrange mineral beneficiation experiment after received your sample and provide the test report.