Customization: | Available |
---|---|
Voltage: | 380V |
Weight: | 5T |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Our factory produce complete mining plants for different minerals separation | ||
Coltan | Diamond | Zircon sand |
Tantalum | River sand gold | Titanium |
Cobalt | Alluvial gold | Tin /Cassiterite |
Tungsten | Rock stone gold | Heavy minerals sand |
Tantalite | placer gold | Chromium ore |
Silica sand | Gold tailing | Monazite |
Copper | Clay gold mining | Tungsten ore |
Barite | Desert sand gold | llmenite |
Chrome | Quartz | Wolfram ore |
Iron ore | Coal | Niobium |
Manganese ore | Sand gravel | Rutile |
Fluorite | Topsoil | Hematite |
Model | Max. Input size (mm) | Capacity (t/h) |
Eccentric shaft Speed (r/min) | Installation slope | Power (kw) |
Weight (t) |
GL2400*800 | 480 | 30-80 | 400-500 | 0° | 7.5 | 2.8 |
GL3800*950 | 520 | 96-160 | 500-714 | 0° | 11 | 4 |
GL4200*1100 | 590 | 120-240 | 500-800 | 0° | 15 | 4.7 |
GL4900*960 | 550 | 120-240 | 500-800 | 0° | 15 | 5.35 |
GL4900*1100 | 620 | 120-280 | 500-800 | 0° | 15 | 5.3 |
GL5900*1100 | 650 | 220-350 | 500-800 | 0° | 22 | 6 |
GL6000*1300 | 760 | 400-550 | 500-800 | 0° | 22 | 7.5 |
Type | Feed Opening | Max. Feeding Size | Adjusting Range Of | Capacity | Rotation Speed Of | Motor Power | Total Weight | Dimensions |
Discharge Opening | Eccentric Shaft | |||||||
(mm) | (mm) | (mm) | (t/h) | (r/min) | (KW) | (Ton) | (mm) | |
PE-200*300 | 200*300 | 180 | 15-50 | 2-6 | 260 | 7.5 | 1 | 910*750*990 |
PE-200*350 | 200*350 | 180 | 18-70 | 3-10 | 260 | 11 | 1.3 | 1000*870*990 |
PE-250*400 | 250*400 | 210 | 20-60 | 5-20 | 300 | 15 | 2.8 | 1300*1090*1270 |
PE-400*600 | 400*600 | 340 | 40-100 | 16-60 | 275 | 30 | 7 | 1730*1730*1630 |
PE-500*750 | 500*750 | 425 | 40-110 | 275 | 55 | 12 | 1980*2080*1870 | |
PE-600*900 | 600*900 | 500 | 75-200 | 60-200 | 250 | 75 | 20 | 2290*2290*2400 |
PE-750*1060 | 750*1060 | 630 | 80-140 | 115-330 | 250 | 110 | 29 | 2660*2430*2800 |
PE-870*1060 | 870*1060 | 660 | 200-260 | 290-336 | 250 | 110 | 31.5 | 2810*2430*2800 |
PE-900*1060 | 900*1060 | 685 | 230-290 | 160-400 | 250 | 110 | 33 | 2870*2420*2940 |
PE-900*1200 | 900*1200 | 750 | 95-165 | 220-450 | 200 | 110 | 52 | 3380*2870*3330 |
PE-1000*1200 | 1000*1200 | 850 | 195-265 | 315-500 | 200 | 110 | 55 | 3480*3876*3330 |
PE-1200*1500 | 1200*1500 | 1020 | 150-300 | 400-800 | 180 | 160 | 100.9 | 4200*3300*3500 |
PEX-150*750 | 150*750 | 120 | 18-48 | 8-25 | 320 | 15 | 3.8 | 1200*1530*1060 |
PEX-250*750 | 250*750 | 210 | 25-60 | 13-35 | 330 | 30 | 5.5 | 1380*1750*1540 |
PEX-250*1000 | 250*1000 | 210 | 25-60 | 16-52 | 330 | 37 | 7 | 1560*1950*1390 |
PEX-250*1200 | 250*1200 | 210 | 25-60 | 20-61 | 330 | 45 | 8.5 | 2140*1660*1500 |
PEX-300*1300 | 300*1300 | 250 | 20-90 | 16-105 | 300 | 75 | 11 | 2720*1950*1600 |
Model | Shell rotation speed (r/min) | Ball load (t) | Feeding size(mm) | Discharging size(mm) | Capacity(t/h) | Motorpower(kw) | Weight |
Ø600*1200 | 20~36 | 0.5 | <=20 | 0.074-0.4 | 0.2~1 | 7.5 | 1.6 |
Ø900*1800 | 36~38 | 1.5 | <=20 | 0.075-0.89 | 0.65~2 | 18.5 | 4.6 |
Ø900*3000 | 36 | 2.7 | <=20 | 0.075-0.89 | 1.1~3.5 | 22 | 5.6 |
Ø1200*2400 | 36 | 3 | <=25 | 0.075-0.6 | 1.5~4.8 | 30 | 12 |
Ø1200*3000 | 36 | 3.5 | <=25 | 0.074-0.4 | 1.6~5 | 37 | 12.8 |
Ø1200*4500 | 32.4 | 5 | <=25 | 0.074-0.4 | 1.6~5.8 | 55 | 13.8 |
Ø1500*3000 | 29.7 | 7.5 | <=25 | 0.074-0.4 | 2~5 | 75 | 15.6 |
Ø1500*4500 | 27 | 11 | <=25 | 0.074-0.4 | 3~6 | 110 | 21 |
Ø1500*5700 | 28 | 12 | <=25 | 0.074-0.4 | 3.5~6 | 130 | 24.7 |
Ø1830*3000 | 25.4 | 11 | <=25 | 0.074-0.4 | 4~10 | 130 | 28 |
Ø1830*4500 | 25.4 | 15 | <=25 | 0.074-0.4 | 4.5~12 | 155 | 32 |
Ø1830*6400 | 24.1 | 21 | <=25 | 0.074-0.4 | 6.5~15 | 210 | 34 |
Ø1830*7000 | 24.1 | 23 | <=25 | 0.074-0.4 | 7.5~17 | 245 | 36 |
Ø2100*3000 | 23.7 | 15 | <=25 | 0.074-0.4 | 6.5~36 | 155 | 34 |
Ø2100*4500 | 23.7 | 24 | <=25 | 0.074-0.4 | 8~43 | 245 | 42 |
Ø2100*7000 | 23.7 | 26 | <=25 | 0.074-0.4 | 8~48 | 280 | 50 |
Ø2200*4500 | 21.5 | 27 | <=25 | 0.074-0.4 | 9~45 | 280 | 48.5 |
Ø2200*6500 | 21.7 | 35 | <=25 | 0.074-0.4 | 14~26 | 380 | 52.8 |
Ø2200*7000 | 21.7 | 35 | <=25 | 0.074-0.4 | 15~28 | 380 | 54 |
Ø2200*7500 | 21.7 | 35 | <=25 | 0.074-0.4 | 15~30 | 380 | 56 |
Ø2400*3000 | 21 | 23 | <=25 | 0.074-0.4 | 7~50 | 245 | 54 |
Ø2400*4500 | 21 | 30 | <=25 | 0.074-0.4 | 8.5~60 | 320 | 65 |
Ø2700*4000 | 20.7 | 40 | <=25 | 0.074-0.4 | 12~80 | 400 | 94 |
Ø2700*4500 | 20.7 | 48 | <=25 | 0.074-0.4 | 12~90 | 430 | 102 |
Ø3200*4500 | 18 | 65 | <=25 | 0.074-0.4 | 800 | 137 |
Model | Spiral diam-eter (mm) | Spiral rotation speed (r/min) | Trough length (mm) | Motor power(kw) | Dimensions(mm) | Weight (t) | |||
For driving | For lifting | Len-gth | Width | Height | |||||
FG-3 | 300 | 12-30 | 3000 | 1.1 | --- | 3850 | 490 | 1140 | 0.7 |
FG-5 | 500 | 8-12.5 | 4500 | 1.1 | --- | 5430 | 680 | 1480 | 1.6 |
FG-7 | 750 | 6-10 | 5500 | 3 | --- | 6270 | 980 | 1820 | 2.7 |
FG-10 | 1000 | 5-8 | 6500 | 5.5 | --- | 7590 | 1240 | 2380 | 4 |
FC-10 | 8400 | 7.5 | 9600 | 1240 | 2680 | 6 | |||
FG-12 | 1200 | 4-6 | 6500 | 7.5 | 2.2 | 8180 | 1570 | 3110 | 8.5 |
FC-12 | 8400 | 7.5 | 2.2 | 10370 | 1540 | 3920 | 11 | ||
2FG-12 | 6500 | 15 | 4.4 | 8230 | 2790 | 3110 | 15.8 | ||
2FC-12 | 8400 | 15 | 4.4 | 10370 | 2790 | 3920 | 17.6 | ||
FG-15 | 1500 | 4-6 | 8300 | 7.5 | 2.2 | 10410 | 1880 | 4080 | 12.5 |
FC-15 | 10500 | 7.5 | 2.2 | 12670 | 1820 | 4890 | 16.8 | ||
2FG-15 | 8300 | 15 | 4.4 | 10410 | 3390 | 4080 | 22.1 | ||
2FC-15 | 10500 | 15 | 4.4 | 12670 | 3370 | 4890 | 30.7 | ||
FG-20 | 2000 | 3.6-5.5 | 8400 | 11-15 | 3 | 10790 | 2530 | 4490 | 20.5 |
FC-20 | 12900 | 11-15 | 3 | 15610 | 2530 | 5340 | 28.5 | ||
2FG-20 | 8400 | 22-30 | 6 | 11000 | 4600 | 4490 | 35.5 | ||
2FC-20 | 12900 | 22-30 | 6 | 15760 | 4600 | 5640 | 48.7 |
Description
The Gold Concentration Separator is a new type of gravity concentration equipment for concentrating gold and other high density minerals. The centrifugal concentrator gets many competitive advantages compared with other concentration machines which create high returns for the investors.
The Gold Concentration Separator, which is also called centrifugal concentrator is usually used for roughing separation during the gold separation flowchart to recover most of the useful minerals and get rid of most of the barren rocks.
Technical Data
Model | STLB20 | STLB30 | STLB60 | STLB80 | STLB100 | STLB120 |
Feeding Capacity(t/h) | 0-0.6 | 2-3 | 8-12 | 35-45(solids) | 50-80 | 70-100 |
Fluidization water Required(m 3 /h) | 2-3 | 3-5 | 7-10 | 30-36 | 55-80 | 70-100 |
Slurry Water Required(m 3 /h) | 1.5-4 | 5-7 | 8-12 | 35-50 | 70-100 | 80-120 |
Feeding Density(%) | 0-50 | 0-50 | 0-50 | 0-50 | 0-50 | 0-50 |
Feeding size(mm) | 0-3 | 0-3 | 0-5 | 0-5 | 0-5 | 0-6 |
Concentration Cleaning Up Cycle | Vein gold 1-3 Hours Placer gold " 2-6 Hours | |||||
Concentrate weight(kg) | 2 | 10-20 | 30-40 | 60-70 | 80-90 | 100-150 |
Power Requirements(Kw) | 0.75 | 1.5 | 4 | 11 | 22 | 30 |
Approximate shipping weight(Kg) | 200 | 460 | 1400 | 2000 | 2500 | 3500 |
Approximate created shipping Dimensions (mm) | 790*785*790 | 1180*1140*1250 | 1970*1670*1750 | 2300*1800*2200 | 2300*2000*2000 | 2400*2300*2200 |
Model | 6s-7.6 | 6s-4.08 | 6s-1.95 | 6s-0.5 | |||||
Deck type | Coarse ore deck | Fine sand deck | Slime deck | ||||||
Benefication Area(m2) | 7.6 | 7.6 | 7.6 | 4.08 | 1.95 | 0.5 | |||
Deck size | Length(mm) | 4450 | 4450 | 4450 | 3000 | 2100 | 1100 | ||
Transmission end width (mm) | 1855 | 1855 | 1855 | 1320 | 1050 | 500 | |||
Concentrate end width (mm) | 1546 | 1546 | 1546 | 110 | 850 | 430 | |||
Maximum feeding size(mm) | 2 | 0.5 | 0.15 | Sand -2 Slime-0.1 | Sand -2 Slime-0.074 | Sand -2 Slime-0.074 | |||
Feeding amount | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.4-1.5t/h | 0.3-0.8t/h | 0.05-0.2t/h | |||
Feeding density(%) | 25-30 | 20-25 | 15-25 | 10-30 | |||||
Stroke(mm) | 16-22 | 11-16 | 8-16 | 6-30 | 12-28 | 9-17 | |||
Frequency(F) | 45-220 | 53-250 | 60-280 | 210-320 | 250-450 | 280-460 | |||
Water added | 1-3t/h | 1-3t/h | 1-3t/h | 0.4-2t/h | 0.2-1t/h | 0.1-0.5t/h | |||
Transverse slope of deck | 2°30-4°30 | 1°30-3°30 | 1°-2° | 0-10° | 0-8° | 0-10° | |||
Longitudinal slope of deck | 1.4 | 0.92 | --- | --- | --- | --- | |||
Cross-section shape of deck | rectangular | saw-tooth | triangle | --- | --- | --- | |||
Motor power(kw) | 1.1 | 0.55 | |||||||
Transmission mechanism | Eccentric linkage |
5.Packing & Delivery
6.About Us