Heavy Mineral Sand Zircon Rutile Ilmenite Ore Processing Plant
1.Our factory is the leading mining equipments manufacturer who have over 30 years experience in mining field.
We produce full sets mining equipments for processing and separating gold, copper, tin, iron, zircon, rutile, monazite, tungsten, cassiterite, chrome, coltan, manganese, ilmenite, tantalum, niobium, barite and so on.
Main equipments include Trommel, Rotary scrubber, Jig machine, Spiral chute, Shaking table, Magnetic separator, Electrostatic separator, Jaw crusher, Ball mill, Hammer crusher, Double roller crusher, Vibrating screen, Mercury amalgamation, Gold smelting furnace, Diamond washing machine, Gold pan, Drier machine and so on.
| Our factory produce complete mining plants for different minerals separation |
| Coltan |
Diamond |
Zircon sand |
| Tantalum |
River sand gold |
Titanium |
| Cobalt |
Alluvial gold |
Tin /Cassiterite |
| Tungsten |
Rock stone gold |
Heavy minerals sand |
| Tantalite |
placer gold |
Chromium ore |
| Silica sand |
Gold tailing |
Monazite |
| Copper |
Clay gold mining |
Tungsten ore |
| Barite |
Desert sand gold |
llmenite |
| Chrome |
Quartz |
Wolfram ore |
| Iron ore |
Coal |
Niobium |
| Manganese ore |
Sand gravel |
Rutile |
| Fluorite |
Topsoil |
Hematite |
WE DESIGN SUITABLE PROCESSING FLOWCHART AS PER CUSTOMER'S MINING CONDITION. FOR DETAILS PROCESSING FLOWCHART, PLEASE FEEL FREE TO CONTACT US!
2.Applications
India 200 tons per hour zircon rutile ilmenite beach sand project.
Beach sand main contents :
Gold, Ilmenite, Rutile, Zircon, Tin, Hematite, Magnetite, Andalusite, Quartz, Corindone, Atlri, Garnet, Monazite, etc.
Customer' target: remove magnetic minerals and get the high grade rutile, tin and Zircon, more important to high recovery gold ore.
We design the processing flowchart as below:
a. Use sand pump feed material directly to spiral separator. If there are some bigger stones in deep areas, can consider use trommel screen to separate out particles +2mm
b. Spiral separator: use two-stages spiral separator, first stage is for rough concentration, the middling from first-stage will go to second-stage to concentrate again to get high recovery ratio.
c. Most of the heavy fractions are magnetic minerals, so in order to remove clean as much as possible, it is better to firstly use our factory special designed four rollers wet magnetic separator to remove magnetite ilmenite and hematite and weak magnetic ore.
d. the gold and zircon and other non-magnetic minerals goes to shaking table for concentration, also use two stages shaking table for getting higher concentration effect.
e. after the electrostatic separator, can get rutile and other minerals, maybe still including some magnetic minerals, so use a high intensity dry process magnetic separator to remove the magnetic minerals again, the zircon will be more high grade up to 66% for sale a good price.
3.Relative Main Equipments
1).Spiral separator(Spiral chute)
Description
Spiral separator for Zircon Ore Concentrating are gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. It has extremely good performance and effects in processing placer of beach, riverside, seashore and stream. Ganzhou Gelin Mining Machinery Co., LTd. Spirals are made of polyurethane lined fiber glass with wearable corundum inner surface. Generally there are 5 turns in one start, single, twin, triple and quad starts available per column to suit capacity requirments.
Technical Data
| Model |
5LL-1500 |
5LL-1200 |
5LL-900 |
5LL-600 |
5LL-400 |
| Outside dia(mm) |
1500 |
1200 |
900 |
600 |
400 |
| pitch(mm) |
540,720 |
900,720,540 |
675,540,405 |
450,360,270 |
240,180 |
| Pitch Dia Ratio |
0.75,0.6,0.45 |
0.75,0.6,0.45 |
0.75,0.6,0.45 |
0.75,0.6,0.45 |
0.6,0.45 |
| Lateral slope |
9° |
9° |
9° |
9° |
9° |
| Maximum starts per column |
4-2 |
4-2 |
4-2 |
3-2 |
2-1 |
| Max Feeding Size(mm) |
3 |
3 |
3 |
3 |
3 |
| Feeding Density(%) |
25-55 |
25-55 |
25-55 |
25-55 |
25-55 |
| Capacity(T/H) |
8-6 |
4-6 |
2-3 |
0.8-1.2 |
0.15-0.2 |
External
Size |
Length(mm) |
1560 |
1360 |
1060 |
700 |
460 |
| |
Width(mm) |
1560 |
1360 |
1060 |
700 |
460 |
| |
Height(mm) |
5230 |
5230 |
4000 |
2600 |
1500 |
| Weight (Kg) |
800 |
600 |
400 |
150 |
50 |
2).Shaking tables
Description
Shaking table is one of the main equipments of gravity concentration. Gravity Concentration Equipment is not only widely applied on separating tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. Also widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc. The shaker effective recycling granularity scope is 2-0.037 millimeters.
Technical Data
| Model |
6s-7.6 |
6s-4.08 |
6s-1.95 |
6s-0.5 |
| Deck type |
Coarse ore deck |
Fine sand deck |
Slime deck |
|
|
|
| Benefication Area(m2) |
7.6 |
7.6 |
7.6 |
4.08 |
1.95 |
0.5 |
| Deck size |
Length(mm) |
4450 |
4450 |
4450 |
3000 |
2100 |
1100 |
| Transmission end width (mm) |
1855 |
1855 |
1855 |
1320 |
1050 |
500 |
| Concentrate end width (mm) |
1546 |
1546 |
1546 |
110 |
850 |
430 |
| Maximum feeding size(mm) |
2 |
0.5 |
0.15 |
Sand -2 Slime-0.1 |
Sand -2 Slime-0.074 |
Sand -2 Slime-0.074 |
| Feeding amount |
0.8-1.5ton/h |
0.8-1.5ton/h |
0.8-1.5ton/h |
0.4-1.5t/h |
0.3-0.8t/h |
0.05-0.2t/h |
| Feeding density(%) |
25-30 |
20-25 |
15-25 |
10-30 |
| Stroke(mm) |
16-22 |
11-16 |
8-16 |
6-30 |
12-28 |
9-17 |
| Frequency(F) |
45-220 |
53-250 |
60-280 |
210-320 |
250-450 |
280-460 |
| Water added |
1-3t/h |
1-3t/h |
1-3t/h |
0.4-2t/h |
0.2-1t/h |
0.1-0.5t/h |
| Transverse slope of deck |
2°30-4°30 |
1°30-3°30 |
1°-2° |
0-10° |
0-8° |
0-10° |
| Longitudinal slope of deck |
1.4 |
0.92 |
--- |
--- |
--- |
--- |
| Cross-section shape of deck |
rectangular |
saw-tooth |
triangle |
--- |
--- |
--- |
| Motor power(kw) |
1.1 |
0.55 |
| Transmission mechanism |
Eccentric linkage |
3). High Tension Electrostatic Separator and ARC Plate Separator
Description
High tension electrostatic separator is intended for dry separation of minerals based on the electrical conductivity difference by applying high voltage electrical field.
Technical Data
| Model |
GELIN-ES1 |
GELIN-ES2 |
GELIN-ES3 |
GELIN-ES4 |
GELIN-ES5 |
GELIN-ES6 |
GELIN-ES7 |
GELIN-ES8 |
| Rollers QTY |
2pcs |
2pcs |
2pcs |
2pcs |
2pcs |
4pcs |
4pcs |
4pcs |
| Roller speed |
0-800r/min |
0-800r/min |
0-800r/min |
0-800r/min |
0-500r/min |
0-500r/min |
0-500r/min |
0-500r/min |
| Working voltage |
0-45kv |
0-45kv |
0-45kv |
0-45kv |
0-45kv |
0-60kv |
0-60kv |
0-60kv |
| Feed size |
0-2mm |
0-2mm |
0-2mm |
0-2mm |
0-2mm |
0-2mm |
0-2mm |
0-2mm |
| Capacity |
0.3-1t/h |
0.5-2t/h |
1-2.5t/h |
1-3t/h |
2-3t/h |
1-4t/h |
2-5t/h |
4-8t/h |
4). Wet type magnetic separator & High intensity dry type magnetic separator
Description
Both wet type and dry typte magnetic separator's magnetic field intensity from 800 gauss up to 15000 gausss.
It is very good to separate out strong magnetic iron ore, ilmenite, titanium, hematile, monazite, tin, zircon and other weak magnetic ore.
Wet type magnetic separator
Dry type magnetic separator
4. About Us
Ganzhou Gelin Mining Machinery Company Limited is an expert manufacturing mining machines in China. Our company is located in the Industrial Zone of Shicheng County, Jiangxi Province.
Our distinctive products include Shaking table, Jig, Spiral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, Feeder, Classifier, ore washing machine and lab equipment etc. Our machines are popular in separating gold, copper, manganese, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite, etc.
Our products are sold to more than 28 provinces/cities in China and are exported to Russia, Africa, India, the Middle East, the Philippines, Mongolia, Sudan, Kazakhstan, Brazil, America, Canada and Australia. We have won high reputations from all of our clients for our machines and services.
Besides the above mentioned products, we can also design and manufacture many kinds of special mining machines and automatic processing lines according to the requests of customers. If you are in need of detailed information, please inform us. We will provide you with total solutions according to your specific requirements in time.
5.GELIN Services
--- PRE-SALE SERVICE ---
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
6.Certificate
7.Customer Visiting
8.FAQ
Q: How big is your factory?
A: In tolal 6 work shops,17,000 m²,office 2500 m²,110 workers.
Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?
Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
Q: How long is the warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q: If i need the complete mineral processing line. is Gelin able to help us build it?
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Welcome you visit our factory in your free time!
Audited Supplier 
){kind=link}