Coltan Sand Deironing Equipment Wet Belt Flat Plate Magnetic Separator After Shaking Table

Product Description

Coltan Sand Deironing Equipment Wet Belt Flat Plate Magnetic Separator After Shaking Table

Product Description

FLAT PERMANENT MAGNETIC SEPARATOR is kind of new wet type magnetic separation device combining the characteristics of international advanced high intensity magnetic separators, The surface magnetic strength of the product is large, with the belt type structure, the separation result is good; The use of continuous and complete automatic iron discharge, saving manpower, operation is reliable. Below pictures about this product show is not new one,but at least 3 years used one.

Application Scope
The process can satisfy the need that nonmetallic ores are eliminated iron and depurated largely-scale, the comprehensive economic effect is remarkable.  
It is applicable to beneficiate the weakly magnetic ore and remove the iron impurities from the non-metallic ore, such as mica powder, quartz sand, potassium, feldspar, nepline, fluorite, sillimanite, spodumene, kaoline, manganese ore, weak magnetite, pyrrhotite, calcined ore, ilmenite, hematite, limonite, siderite, chromite, wolframite, columbite-tantalite, red mud. It also can be used in iron-removal operation of coal, non-magnetic ore and building materials, etc.

Features

1.Strong magnetic field intensity from 10000GS to 18000GS;
2.Suitable for the conveying belt, excellent iron separation effect;
3.Automatic and continuous unloading iron, saving manpower, reliable operation

Product Parameters

Model	Width   (mm)	Length   (mm)	Magnetic intensity  (GS)	Capacity(t/h)	Driving Power (kw)
PMS600×1200	600	1200	10000-18000	2-3.5	1.1
PMS600×2000	600	2000		4-7	2.2
PMS900×1200	900	1200		3-5	1.5
PMS900×2000	900	2000		6-8	2.2
PMS1200×1500	1200	1500		5-7	2.2
PMS1200×2400	1200	2400		7-9	2.2
PMS1500×2400	1500	2400		10-12	3
PMS1500×3000	1500	3000		12-14	3
PMS1800×2400	1800	2400		13-15	4
PMS1800×3000	1800	3000		15-17	4
PMS2000×2000	2000	2000		12-16	4
PMS2000×3000	2000	3000		18-20	5.5

Structure & Working Principle

 

When in working, the material flow and unloading system is in a reverse counterflow. According to physical structure principle, the non-magnetic material flows to discharging port so as to achieve complete unloading purpose by washing. The magnetic material is attracted by strong magnet for long distance, wide area and multiply-frequency, and be taken to tapping hole in reverse running by unloading system, then to achieve complete unloading purpose by washing.

Application

 

Related Machines

1.Disk Electromagnetic Separator,It's normally a highly efficient device for separation of difficult minerals with various different degree of difference in their magnetic susceptibilities, to produce very fine selectively achieved clean magnetic fractions with highest recovery. sorting mineral size less than 2-3mm of weakly magnetic minerals and rare metal ore selection, it is a very important mineral processing equipment. normally single disk and three disks type are popular and recommended.

Model	1PC	3PC-500	3PC-600	3PCX600
Magnetic Intensity	18000Gs	Distance to belt surface 2mm Disk teeth 17000Gs	Distance to belt surface 2mm Disk teeth 18000Gs	Distance to belt surface 2mm Disk teeth 20000Gs
Disk Quantity	1 piece	3 pcs	3 pcs	3 pcs
Disk Diameter	885mm	500mm	600mm	600mm
Rotation Speed of Magnetic Disk	30,42,50r/min	25-40 r/min	22-38 r/min	22-32 r/min
Power Supply	380V	380V	380V	380V
Exciting Coil	4 Units	4 Units	4 Units	4 Units
Matching Motor	4 KW (whole power consumption)	0.75 KW	1.5 KW	1.5 KW
Exciting Power	0-2 kw	1.5 kw	1.6 kw	1.6 kw
Coil Temperature	<80ºC	65 °C	65 °C	65 °C
Rated Current of Coil	0-6 A	1.1-1.8 A	1.2-1.9 A	1.2-2.2 A
Duty Rating	Continuous	Continuous	Continuous	Continuous
Feed Width	/	210 mm	300 mm	300 mm
Feed Size	<6mm	≤2 mm	≤2 mm	≤2 mm
Capacity	1-1.8 t/h	100-500 kg/h	120-800 kg/h	80-800 kg/h
Overall Size	298cm×183cm×185cm	280cm×80cm×122cm	320cm×87cm×116cm	315cm×90cm×125cm
Weight	3600 kgs	1900 kgs	2200 kgs	2300 kgs

 

2.CTS(N.B) series single drum magnetic separator ,The magnetic field of this machine divide into rotary and fixed. The fixed one is mainly use in weak magnetic field to separate the fine particle strong magnetic materials, or eliminating the strong magnetic materials in the nonmagnetic ores.
3.high tensity dry magnetic separator  

Capacity:2-5 tons per hour;

Feeder hopper on the top of the machine;

Four drums/rollers:

First drum size: diameter 440mm* length 1100mm, magnetic field intensity:1000 gauss-1500 gauss;

Second drum size:diameter 440mm* length 1100mm, magnetic field intensity:5000gauss-7000 gauss;

Third drum size:diameter 440mm* length 1100mm, magnetic field intensity:8000 gauss-10000 gauss;

Fourth roller size:diameter 220mm* length 1100mm, magnetic field intensity:15000 gauss;

Material: steel for the whole machine frame;

Frequency conversion motors;

AC Inverter Controller to adjust the speed variation of EACH rollers/drums;

Electrc control pannel box to control the machine working;

Usage: it is used for separate Tin ore(cassiterite), Zircon ore, Magnetic iron ore, Ilmenite ore, Monazite ore, Rutile ore, silica sand, ther weak magnetic ore and so on.

This machine is used in P. Kundur. Riau Islands and Mentok, Bangka Islands, Indonesia.

4.High tension (High voltage) electrostatic separator is an dry separating equipment in the high voltage electric field, which eliminate the mineral according to the differences of materials electricity nature.

It adopts the different electrical property of all minerals and materials in the nature to realize the separation.The common minerals like ilmenite, magnetite, cassiterite,and native gold etc,have good conductivity property while quartz, zircon, feldspar, calcite, scheelite,and silicate minerals have poor conductivity property,then the electric separator adopts their different electrical property to realize the separation.

PS:those materials mentioned above are hardly qualified when gravity concentration, flotation and magnetic separation are adopted, such problem can be well solved after electrostatic separation is adopted.

Model	GELIN-ES1	GELIN-ES2	GELIN-ES3	GELIN-ES4	GELIN-ES5	GELIN-ES6	GELIN-ES7	GELIN-ES8
Rollers Qty	2pcs	2pcs	2pcs	2pcs	2pcs	4pcs	4pcs	4pcs
Roll Specification	120*750mm	120*1500mm	165*1500mm	220*1500mm	320*1500mm	165*1500mm	220*1500mm	320*1500mm
Roller speed	0-800r/min	0-800r/min	0-800r/min	0-800r/min	0-500r/min	0-500r/min	0-500r/min	0-500r/min
Working voltage	0-45kv	0-45kv	0-45kv	0-45kv	0-45kv	0-60kv	0-60kv	0-60kv
Motor(kw)	1.1	1.1	1.5	1.5/2.2	3	3/4.4	3/4.4	6
Feed size	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm	0-2mm
Capacity	0.3-1t/h	0.5-2t/h	1-2.5t/h	1-3t/h	2-3t/h	1-4t/h	2-5t/h	4-8t/h
Dimension L*W*H (mm)	1300*800*1800	2100*1000*3100	2100*1250*3100	2100*1330*3100	2100*1500*4500	2100*1330*4500	2100*1500*4500	2100*2800*4500

Company Profile

Ganzhou Gelin Mining Machinery Co., Ltd is an over 30 years professional manufacturer and exporter of mining machinery for crushing, screening, grinding, flotation, magnetic/gravity separation etc. in China.the machines are excellent for processing gold,diamond,iron ore, ilmenite, manganese ore etc. Gelin have a complete service system which can provide customer full service in mining field and after sales service.By now, Gelin's equipments and services are exported to over 60 countries,include America, Russia, India, Africa, Brazil, Chile,South Africa,Zambia etc. Sincerely welcome to visit our factory.

Customer Visiting
Our Services

One Stop solution for beneficiation plant service:
1.Engineering consulting available,it makes clients have a comprehensive understanding of beneficiation plant,including mine value,useful elements,mineral processing technology,plant scale,essential equipments,etc.

 

2.Arrange mineral beneficiation experiment after received the material sample and beneficiation test report will be done after test.

3.After reaching agreement with client,we start to engineering design,including planning,investigation,data collection, project evaluation etc. and then comes up with design scheme of beneficiation plant construction and working drawings.

 

4.Manufacturing the necessary equipments and arrange the shipment.

 

5.Complete services for Installation and commissioning and technical training(operating training,common problem solving training).

 

After-sale Service

Regularly visit customers to provide after- sale technical supports and to solve problems of beneficiation plant. For equipments supplied,we could provide one-year warranty and provide spare parts with preferential price in the long term and be responsible for any problems with the them.

FAQ

Q: Are you a trading company or a factory?
A: We are a factory at Shicheng county with 110 workers,6 workshops covered 17,000m² and office covered 2,500m². Welcome to visit our factory at anytime.

 

Q: What is your payment terms?
A: By TT(Telegraphic Transfer), 100% or 40% Deposit before production and 60% balance payment paid off before loading from factory.

Q: How long is the guarantee period of your products?

A: The guarantee period is 1-2 years, pls ask staff for more details. And we will supply lifelong technical support service and the spare parts at lowest cost.

 

Q: Is it possible to produce customized products ?
A: Yes, most of our products are produced as required.

 

Q: Is it possible to provide sample for your factory to do ore-dressing experiment?
A: Yes, engineering consulting is available and we'd like to arrange mineral beneficiation experiment after received your sample and provide the test report.