High Grade Lead & Zinc Ore Beneficiation Plant

Product Description

High grade Lead & Zinc ore beneficiation plant

 
Full sets mining equipments for rock Lead, Zinc, Gold, Silver, Copper, Cassiterite, Tungsten, Tantalum, Niobium, Titanium iron ore processing, such as trommel screen, vibrating screen, jaw crusher, cone crusher, ball mill, spiral classifier, flotation cell machine, shaking table, spiral separator, magnetic separator, electrostatic separator and so on.

The equipments details as below

Jaw Crusher
Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, rock crushing, metall-urgical industry, building material, highway, railway, and chemical industry.
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

Technical Data of Big Jaw Crusher

Type	Feed Opening (mm)	Max.feeding size(mm)	Adjusting range of discharge opening(mm)	Capacity(t/h)	Rotation speed of eccentric shaft(r/min)	Motor power(kw)	total weight(t)	Dimensions(mm)
PE-200*300	200*300	180	15-50	2-6	260	7.5	1	910*750*990
PE-200*350	200*350	180	18-70	3-10	260	11	1.3	1000*870*990
PE-250*400	250*400	210	20-60	5-20	300	15	2.8	1300*1090*1270
PE-400*600	400*600	340	40-100	16-60	275	30	7	1730*1730*1630
PE-500*750	500*750	425	50-100	40-110	275	55	12	1980*2080*1870
PE-600*900	600*900	500	75-200	60-200	250	75	20	2290*2290*2400
PE-750*1060	750*1060	630	80-140	115-330	250	110	29	2660*2430*2800
PE-870*1060	870*1060	660	200-260	290-336	250	110	31.5	2810*2430*2800
PE-900*1060	900*1060	685	230-290	160-400	250	110	33	2870*2420*2940
PE-900*1200	900*1200	750	95-165	220-450	200	110	52	3380*2870*3330
PE-1000*1200	1000*1200	850	195-265	315-500	200	110	55	3480*3876*3330
PE-1200*1500	1200*1500	1020	150-300	400-800	180	160	100.9	4200*3300*3500
PEX-150*750	150*750	120	18-48	8-25	320	15	3.8	1200*1530*1060
PEX-250*750	250*750	210	25-60	13-35	330	30	5.5	1380*1750*1540
PEX-250*1000	250*1000	210	25-60	16-52	330	37	7	1560*1950*1390
PEX-250*1200	250*1200	210	25-60	20-61	330	45	8.5	2140*1660*1500
PEX-300*1300	300*1300	250	20-90	16-105	300	75	11	2720*1950*1600

Ball mill

Ball mill is the key re-crush eqipment after the crushing. Ball mill is widely used in cement, silicate products, new building materials, refractories, chemical fertilizer, black and non-ferrous metal ore-dressing, as well as the production industry of glass or ceramics, for carry though dry or wet grinding of a variety ores and other materials.

Technical Data

Model	Shell rotation speed (r/min)	Ball load (t)	Feeding size(mm)	Discharging size(mm)	Capacity(t/h)	Motorpower(kw)	Weight
Ø600*1200	20~36	0.5	<=20	0.074-0.4	0.2~1	7.5	1.6
Ø900*1800	36~38	1.5	<=20	0.075-0.89	0.65~2	18.5	4.6
Ø900*3000	36	2.7	<=20	0.075-0.89	1.1~3.5	22	5.6
Ø1200*2400	36	3	<=25	0.075-0.6	1.5~4.8	30	12
Ø1200*3000	36	3.5	<=25	0.074-0.4	1.6~5	37	12.8
Ø1200*4500	32.4	5	<=25	0.074-0.4	1.6~5.8	55	13.8
Ø1500*3000	29.7	7.5	<=25	0.074-0.4	2~5	75	15.6
Ø1500*4500	27	11	<=25	0.074-0.4	3~6	110	21
Ø1500*5700	28	12	<=25	0.074-0.4	3.5~6	130	24.7
Ø1830*3000	25.4	11	<=25	0.074-0.4	4~10	130	28
Ø1830*4500	25.4	15	<=25	0.074-0.4	4.5~12	155	32
Ø1830*6400	24.1	21	<=25	0.074-0.4	6.5~15	210	34
Ø1830*7000	24.1	23	<=25	0.074-0.4	7.5~17	245	36
Ø2100*3000	23.7	15	<=25	0.074-0.4	6.5~36	155	34
Ø2100*4500	23.7	24	<=25	0.074-0.4	8~43	245	42
Ø2100*7000	23.7	26	<=25	0.074-0.4	8~48	280	50
Ø2200*4500	21.5	27	<=25	0.074-0.4	9~45	280	48.5
Ø2200*6500	21.7	35	<=25	0.074-0.4	14~26	380	52.8
Ø2200*7000	21.7	35	<=25	0.074-0.4	15~28	380	54
Ø2200*7500	21.7	35	<=25	0.074-0.4	15~30	380	56
Ø2400*3000	21	23	<=25	0.074-0.4	7~50	245	54
Ø2400*4500	21	30	<=25	0.074-0.4	8.5~60	320	65
Ø2700*4000	20.7	40	<=25	0.074-0.4	12~80	400	94
Ø2700*4500	20.7	48	<=25	0.074-0.4	12~90	430	102
Ø3200*4500	18	65	<=25	0.074-0.4		800	137

Spiral classifier

Our spiral classifiers are widely used in the distribution of ore in closed circuits with ball mills, grading ore and fine slit in gravity mills, grading granularity and flow of metal ore-dressing, and de-sliming and dehydrating in washing. This product features simple structure, reliable working conditions and convenient operation.
Because different grains have different specific gravity and sedimentation rates in liquid, this product allows the fine ore to flow in the water, while coarse ore sinks to the bottom. This classifier can filter materials and send coarse materials to the feeding mouth and discharge fine materials from the pipe.
The seat of the machine features channel steel material, while the body is armor plated and the spiral axle is made of cast iron for durability. The machine's lifting equipment can be used manually or electronically.

Teachnical Data of Spiral Classifier

Model	Spiral diam-eter (mm)	Spiral rotation speed (r/min)	Trough length (mm)	Motor power(kw)		Dimensions(mm)			Weight (t)
				For driving	For lifting	Len-gth	Width	Height
FG-3	300	12-30	3000	1.1	---	3850	490	1140	0.7
FG-5	500	8-12.5	4500	1.1	---	5430	680	1480	1.6
FG-7	750	6-10	5500	3	---	6270	980	1820	2.7
FG-10	1000	5-8	6500	5.5	---	7590	1240	2380	4
FC-10			8400	7.5		9600	1240	2680	6
FG-12	1200	4-6	6500	7.5	2.2	8180	1570	3110	8.5
FC-12			8400	7.5	2.2	10370	1540	3920	11
2FG-12			6500	15	4.4	8230	2790	3110	15.8
2FC-12			8400	15	4.4	10370	2790	3920	17.6
FG-15	1500	4-6	8300	7.5	2.2	10410	1880	4080	12.5
FC-15			10500	7.5	2.2	12670	1820	4890	16.8
2FG-15			8300	15	4.4	10410	3390	4080	22.1
2FC-15			10500	15	4.4	12670	3370	4890	30.7
FG-20	2000	3.6-5.5	8400	11-15	3	10790	2530	4490	20.5
FC-20			12900	11-15	3	15610	2530	5340	28.5
2FG-20			8400	22-30	6	11000	4600	4490	35.5
2FC-20			12900	22-30	6	15760	4600	5640	48.7

Flotation Cell Machine 

SF Flotation & XJK Flotation
Flotation equipment is applicable for separating non-ferrous metal, black metal, noble metal, etc.Flotation machine, flotation equipment is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and floatation, so the useful ore are reclaimed.

Features
The Floatation Machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns Three functions: Air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.


Application

Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The Impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder.The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.


Working principle & structure of flourite ore flotation machine

The flotation machine's impeller is driven by V-belts, which can bring the centrifugal effect to form the negative pressure. On the one hand, to inhale sufficient air to mix with ore pulp to stir ore pulp and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board.

Technical Data

Model	Volume	Cell size	Impeller Dia.	Impeller speed	Capacity	Power	Singe cell weight
	m3	mm	mm	r/min	m3/min	kw	kg
XJ-3	0.35	700× 700× 700	300	483	0.18-0.4	2.2/0.55	430
XJ-6	0.62	820× 900× 850	350	400	0.3-0.9	3/1.1	755
XJ-11	1.1	1100× 1100× 1000	500	330	0.6-1.6	5.5/1.1	1416
XJ-28	2.8	1750× 1600× 1100	600	280	1.5-3.5	11/1.1	2113
XJ-58	5.8	2200× 2200× 1200	750	240	3--7	22/1.5	3400
SF-0.37	0.37	700× 700× 750	296	386	0.2-0.4	1.5/0.55	468
SF-0.7	0.7	820× 900× 950	350	400	0.3-0.9	3/1.1	805
SF-1.2	1.2	1100× 1100× 1100	450	312	0.6-1.2	5.5/1.1	1373
SF-2.8	2.8	1700× 1600× 1150	550	268	1.5-3.5	11/1.5	2138
SF-4	4	1850× 2050× 1200	650	220	2--4	15/1.5	2582
SF-8	8	2200× 2900× 1400	760	191	4--8	30/1.5	4129
SF-10	10	2200× 2900× 1700	760	191	5--10	30/1.5	4486
SF-16	16	2850× 3800× 1700	760	191	5--16	30× 2/1.5	8320
SF-20	20	2850× 3800× 2000	760	191	5--20	30× 2/1.5	9828

Shaking table
Gravity equipment to separate out different minerals as per the minerals' different density. It is friendly to the earth and there is no any polution.

Technical Data
 

Model		6S-7.6			6S-4.08	6S-1.95		6S-0.5
Deck type		Coarse ore deck	Fine sand deck	Slime deck
Benefication Area(m2)		7.6	7.6	7.6	4.08	1.95		0.5
Deck size	Length(mm)	4450	4450	4450	3000	2100		1100
	Transmission end width (mm)	1855	1855	1855	1320	1050		500
	Concentrate end width (mm)	1546	1546	1546	1100	850		430
Maximum feeding size(mm)		2	0.5	0.15	Sand -2	Sand -2		Sand -2
					Slime-0.1	Slime-0.074		Slime-0.074
Feeding amount		0.8-1.5ton/h	0.8-1.5ton/h	0.8-1.5ton/h	0.4-1.5t/h	0.3-0.8t/h		0.05-0.2t/h
Feeding density(%)		25-30	20-25	15-25	10-30
Stroke(mm)		16-22	11-16	8-16	6-30		12-28	9-17
Frequency(F)		45-220	53-250	60-280	210-320		250-450	280-460
Water added		1-3t/h	1-3t/h	1-3t/h	0.4-2t/h		0.2-1t/h	0.1-0.5t/h
Transverse slope of deck		2°30-4°30	1°30-3°30	1°-2°	0-10°		0-8°	0-10°
Longitudinal slope of deck		1.4	0.92	---	---		---	---
Cross-section shape of deck		rectangular	saw-tooth	triangle	---		---	---
Motor power(kw)		1.1						0.55
Transmission mechanism		Eccentric linkage

Our company & Customers Visiting

Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.

--- PRE-SALE SERVICE ---

1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.

--- AFTER-SALE SERVICE ---

1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
        1) Installation & debug of the machinery
        2) Train the first-line operators & technical personnel
        3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term

--- ONE STOP SOLUTION ---

1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.

FAQ

Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.

A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?

Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?

A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

Q: How long is the warrenty of your equipments? Does your company supply the spare parts?

A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.

Q: If i need the complete mineral processing line. is Gelin able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.

Welcome to visit our factory in your free time!