200tph Angola Gold and Diamond Dense Media Separation Plant
1.Our factory is the leading mining equipments manufacturer who have over 30 years experience in mining field.
We produce full sets mining equipments for processing and separating gold, copper, tin, iron, zircon, rutile, monazite, tungsten, cassiterite, chrome, coltan, manganese, ilmenite, tantalum, niobium, barite and so on.
Main equipments include Trommel, Rotary scrubber, Jig machine, Spiral chute, Shaking table, Magnetic separator, Electrostatic separator, Jaw crusher, Ball mill, Hammer crusher, Double roller crusher, Vibrating screen, Mercury amalgamation, Gold smelting furnace, Diamond washing machine, Gold pan, Drier machine and so on.
| Our factory produce complete mining plants for different minerals separation |
| Coltan |
Diamond |
Zircon sand |
| Tantalum |
River sand gold |
Titanium |
| Cobalt |
Alluvial gold |
Tin /Cassiterite |
| Tungsten |
Rock stone gold |
Heavy minerals sand |
| Tantalite |
placer gold |
Chromium ore |
| Silica sand |
Gold tailing |
Monazite |
| Copper |
Clay gold mining |
Tungsten ore |
| Barite |
Desert sand gold |
llmenite |
| Chrome |
Quartz |
Wolfram ore |
| Iron ore |
Coal |
Niobium |
| Manganese ore |
Sand gravel |
Rutile |
| Fluorite |
Topsoil |
Hematite |
2.Processing Steps
1).Raw ores are feeded into grizzly feeding hopper by excavator and enter into trommel screen,with the operation and scrubbing by the high pressure water in trommel, ores with clays and silts was broken up,big coarse ore was discharged from tails of trommel and fine ore dischaged into jig machine via steel chute or steel pipes.
2).After rougher and clear concentration of jig machine,grass mat on sluice box catches and collect the usefull ore out of tailings which from jig machine.
3).Concentrates from jig machine was further concenrated by shaking table, magnetic minerals (iron ore,ilmenite ore etc.)in gold concentrates was separated by mangetic separator,then with amalgamation and furnace,the pure gold comes out.
3.Applications
AS per different mining condition, we design the flowchart as below
a). Washing trommel+Centrifugal concentrator+Shaking table;
b). Washing trommel+Jig machine(Jigger)+Shaking table;
c). Washing trommel+Sluice box with grass mat(carpet).
Mainly processing for
1). Diamond mining
2). Alluvial gold, placer gold, gold sand
3). Clay alluvial, River dirt gold & diamond with clay
4). Desert sand, gold tailing
5). Dirty stones
6). Other type mining washing and classify and separation
150T/H alluvail gold processing plant at Cote D'ivoire
4.Relative Main Equipments
1). Trommel Screen
Description
The trommel screen provide a simple, efficient and economical solution to upgrade a wide rang of material and optimize the subsequent process steps of recovery. This method of screening helps to reduce operating and investment cost and to increase product quality, while allowing rapid and large volume processing.
Technical Data
| Model |
Capacity (t/h) |
Wheel
quantity |
Water pump
& water pipe |
Diesel engine
/ Electric motor |
Drum
diameter |
Drum length |
Screen size(mm) |
Weight
(kgs) |
| GL510 |
5-10 |
4 |
include |
Diesel/Electric |
500 mm |
1300 mm |
<3-20 |
800 |
| GL615 |
10-20 |
4 |
include |
Diesel/Electric |
600 mm |
1500 mm |
<3-20 |
1000 |
| GL715 |
20-30 |
4 |
include |
Diesel/Electric |
700 mm |
1500 mm |
<3-20 |
1100 |
| GL815 |
30-40 |
4 |
include |
Diesel/Electric |
800 mm |
1500 mm |
<3-20 |
1200 |
| GL1020 |
40-100 |
4 |
include |
Diesel/Electric |
1000 mm |
2000 mm |
<3-20 |
2300 |
| GL1225 |
100-160 |
4 |
include |
diesel engine |
1200 mm |
2500 mm |
<3-20 |
3000 |
| GL1530 |
150-200 |
4-6 |
include |
Diesel/Electric |
1500 mm |
3000 mm |
<3-20 |
4000 |
| GL1545 |
200-300 |
4-6 |
include |
Diesel/Electric |
1500 mm |
4500 mm |
<3-20 |
4500 |
| GL1848 |
300-450 |
4-6 |
include |
Diesel/Electric |
1800 mm |
4800 mm |
<3-20 |
6000 |
| GL2055 |
400-600 |
4-6 |
include |
Diesel/Electric |
2000 mm |
5500 mm |
<3-20 |
8000 |
2). Jig Machine
Description
Jig Machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Saw-tooth wave jig is mainly consist of three parts: Main frame, driving set and jigging chamber.
The machine is suitable for sorting ferrous and nonferrous metals, chemicals, construction and metallurgical aspects of experimental research.
Technical Data
| Model |
Chamber |
Maximum
Feeding
size(mm) |
Water
added
m3/t |
Pressure
of water
Mpa |
Capacity
t/h |
Motor
power
kw |
Dimension
mm |
Weight
kg |
| shape |
area(m2) |
| JT0.57-1 |
Ladder |
0.57 |
6 |
1-3 |
>=0.5 |
1-2.5 |
1.5 |
1550x780x1530 |
610 |
| JT1-1 |
Ladder |
1.04 |
10 |
1-3 |
2-4 |
2.2 |
2270x1110x1890 |
900 |
| JT1.5-2 |
Rect |
1.53 |
10 |
1-2 |
3-8 |
3 |
3200x1550x2050 |
1520 |
| JT2-2 |
Rect |
2.28 |
10 |
1-3 |
4-8 |
3 |
3225x1550x2050 |
1640 |
| JT3-1 |
Ladder |
3.3 |
10 |
1-3 |
6-10 |
5.5 |
3180x2000x2600 |
3260 |
| JT4-2 |
Rect |
4.33 |
30 |
1-3 |
10-15 |
7.5 |
3600x1850x2600 |
4600 |
| JT5-2 |
Ladder |
4.86 |
10 |
1-3 |
10-15 |
7.5 |
3600x2000x2600 |
4500 |
| JT1.5-2S |
Rect |
1.53 |
30 |
1-3 |
3-8 |
1.5x2 |
3200x1550x2050 |
1590 |
| JT2-2S |
Rect |
2.28 |
30 |
1-3 |
4-8 |
3x2 |
3225x1550x2050 |
1700 |
| JT3-2S |
Rect |
3 |
30 |
1-3 |
6-15 |
5.5x2 |
3560x2030x2600 |
3260 |
| JT4-2S |
Rect |
4.33 |
30 |
1-3 |
10-20 |
4x2 |
3600x1850x2600 |
4660 |
| JT5-2S |
Ladder |
4.86 |
30 |
1-3 |
10-20 |
5.5x2 |
3600x2000x2600 |
4700 |
| JT6-3S |
Rect |
6 |
30 |
1-3 |
15-30 |
7.5x2 |
4600x2000x2600 |
5900 |
3). Gravity Centrifugal Concentrator
Description
The Gold Concentration Separator is a new type of gravity concentration equipment for concentrating gold and other high density minerals. The centrifugal concentrator gets many competitive advantages compared with other concentration machines which create high returns for the investors.
The Gold Concentration Separator, which is also called centrifugal concentrator is usually used for roughing separation during the gold separation flowchart to recover most of the useful minerals and get rid of most of the barren rocks.
Technical Data
| Model |
STLB20 |
STLB30 |
STLB60 |
STLB80 |
STLB100 |
STLB120 |
| Feeding Capacity(t/h) |
0-0.6 |
2-3 |
8-12 |
35-45(solids) |
50-80 |
70-100 |
| Fluidization water Required(m 3 /h) |
2-3 |
3-5 |
7-10 |
30-36 |
55-80 |
70-100 |
| Slurry Water Required(m 3 /h) |
1.5-4 |
5-7 |
8-12 |
35-50 |
70-100 |
80-120 |
| Feeding Density(%) |
0-50 |
0-50 |
0-50 |
0-50 |
0-50 |
0-50 |
| Feeding size(mm) |
0-3 |
0-3 |
0-5 |
0-5 |
0-5 |
0-6 |
| Concentration Cleaning Up Cycle |
Vein gold 1-3 Hours Placer gold " 2-6 Hours |
|
| Concentrate weight(kg) |
2 |
10-20 |
30-40 |
60-70 |
80-90 |
100-150 |
| Power Requirements(Kw) |
0.75 |
1.5 |
4 |
11 |
22 |
30 |
| Approximate shipping weight(Kg) |
200 |
460 |
1400 |
2000 |
2500 |
3500 |
| Approximate created shipping Dimensions (mm) |
790*785*790 |
1180*1140*1250 |
1970*1670*1750 |
2300*1800*2200 |
2300*2000*2000 |
2400*2300*2200 |
4). Shaking Table
Description
GELIN Shaking Table is one of the main equipments of gravity concentration. It is not only widely applied on separating tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. It is also widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc. The shaking effective recycling granularity scope is 2-0.22 millimeters.
Technical Data
| Model |
6s-7.6 |
6s-4.08 |
6s-1.95 |
6s-0.5 |
| Deck type |
Coarse ore deck |
Fine sand deck |
Slime deck |
|
|
|
| Benefication Area(m2) |
7.6 |
7.6 |
7.6 |
4.08 |
1.95 |
0.5 |
| Deck size |
Length(mm) |
4450 |
4450 |
4450 |
3000 |
2100 |
1100 |
| Transmission end width (mm) |
1855 |
1855 |
1855 |
1320 |
1050 |
500 |
| Concentrate end width (mm) |
1546 |
1546 |
1546 |
110 |
850 |
430 |
| Maximum feeding size(mm) |
2 |
0.5 |
0.15 |
Sand -2 Slime-0.1 |
Sand -2 Slime-0.074 |
Sand -2 Slime-0.074 |
| Feeding amount |
0.8-1.5ton/h |
0.8-1.5ton/h |
0.8-1.5ton/h |
0.4-1.5t/h |
0.3-0.8t/h |
0.05-0.2t/h |
| Feeding density(%) |
25-30 |
20-25 |
15-25 |
10-30 |
| Stroke(mm) |
16-22 |
11-16 |
8-16 |
6-30 |
12-28 |
9-17 |
| Frequency(F) |
45-220 |
53-250 |
60-280 |
210-320 |
250-450 |
280-460 |
| Water added |
1-3t/h |
1-3t/h |
1-3t/h |
0.4-2t/h |
0.2-1t/h |
0.1-0.5t/h |
| Transverse slope of deck |
2°30-4°30 |
1°30-3°30 |
1°-2° |
0-10° |
0-8° |
0-10° |
| Longitudinal slope of deck |
1.4 |
0.92 |
--- |
--- |
--- |
--- |
| Cross-section shape of deck |
rectangular |
saw-tooth |
triangle |
--- |
--- |
--- |
| Motor power(kw) |
1.1 |
0.55 |
| Transmission mechanism |
Eccentric linkage |
5.Packing & Delivery
6.About Us
Ganzhou Gelin Mining Machinery Company Limited is an expert manufacturing mining machines in China. Our company is located in the Industrial Zone of Shicheng County, Jiangxi Province.
Our distinctive products include Shaking table, Jig, Spiral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, Feeder, Classifier, ore washing machine and lab equipment etc. Our machines are popular in separating gold, copper, manganese, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite, etc.
Our products are sold to more than 28 provinces/cities in China and are exported to Russia, Africa, India, the Middle East, the Philippines, Mongolia, Sudan, Kazakhstan, Brazil, America, Canada and Australia. We have won high reputations from all of our clients for our machines and services.
Besides the above mentioned products, we can also design and manufacture many kinds of special mining machines and automatic processing lines according to the requests of customers. If you are in need of detailed information, please inform us. We will provide you with total solutions according to your specific requirements in time.
7.GELIN Services
--- PRE-SALE SERVICE ---
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
8.Certificate
9.Customer Visiting
10.FAQ
Q: How big is your factory?
A: In tolal 6 work shops,17,000m², office 2500 m², 110 workers.
Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?
Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
Q: How long is the warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q: If i need the complete mineral processing line. is Gelin able to help us build it?
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Welcome you visit our factory in your free time!
Audited Supplier 
2.Processing Steps
){kind=link}