| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 1 Years |
|
Still deciding? Get samples of US$ 4500/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High quality CSQ50*70 Wet laboratory magnetic separator for sale
The CSQ-50*70 Wet High Intensity Magnetic Separator is a high-efficiency magnetic separation device specifically designed for processing fine-grained minerals. lt is suitable for minerals with a particle size of less than 0.5 millimeters, and it is particularly effective for the enrichment of weakly magnetic minerals (such as hematite,chromite).
This equipment uses water as a medium to achieve the separation of minerals. It is widely used in metal ore dressing laboratories, mining engineering experiments,and intermediate experimental plants, and it is very effective for experiments on low-grade iron oxide ores, requiring only a small amount of sample to obtain technical indicators for testing the iron content of the minerals.
Features
1. Large magnetic force area
2. High processing capacity
3. Good experimental results
4. Good selection indicators
5. Strong durability
6. Easy to operate
Application
1. Applicable for the processing of hematite, pseudo-hematite, limonite, and siderite, as well as some rare metal minerals in laboratory selection of fine-grained embedded ores.
2. Applicable for experiments on low-grade iron oxide ores.
3. Suitable for experimental separation of ores such as manganese ore, beach sand ore, tin ore, and glass sand.
Specification
|
Model |
Sorting Box Size(mm) |
Intensity Range |
Coil Cooling Method |
Feed Size |
Boundary Dimension(mm) |
|
CSO-50*70 |
50*70*220 |
0-23000 |
forced air-cooling |
≤1 |
840*550*1415 |
|
Capacity |
Reference |
total power Consumed(KVA) |
Excitation Voltage |
||
|
4-5 |
795 |
≤4 |
Input (single-phase AC)220V 50Hz, Output (DC)0-118V, 1-25A |
||
Working principle
The machine automatically resets to its initial state under the control of the PLC module: the feeding valve is set to the closed position, and the splitter is set to the tailings position, A transition delay of 3 seconds is set to prevent mixing, meaning that the splitter remains in the "tailing", "middle" and "concentrate" positions for 3 seconds during the process.
The sorting process is as follows: the slurry in the stirring vessel enters the sorting box through the feeding valve and the flat nozzle, Non-magnetic mineral particles fall into the tailings bucket under the influence of gravity through the gaps in the tooth plate, while magnetic mineral particles are adsorbed onto the tooth plate under the influence of the magnetic field. After feeding, the splitter swings to the upper part of the middlings bucket, and the electromagnetic valve for washing the middlings is opened (the flow rate can be adjusted by the middlings washing gate valve) to wash away the non-magnetic mineral particles mixed in the sorting box. The spliter then swings to the upper part of the concentrate bucket, while the power supply for magnetization is cut off, After the magnetic field in the sorting box disappears, the electromagnetic valve for washing the concentrate is opened, flushing the magnetic mineral particles adsorbed on the tooth plate into the concentrate bucket (the flushing amount is adjusted by the concentrate gate valve). After completing one sorting cycle, the PLC resets for the next cycle, continuing the sorting process. The ultimate goal is to achieve the separation of magnetic and non-magnetic minerals.
Ganzhou Gelin Mining Machinery Co., Ltd is an over 30 years professional manufacturer and exporter of mining machinery for crushing, screening, grinding, flotation, separation etc. in China. Gelin have a complete service system which can provide customer full service in mining field and after sales service.By now, Gelin's equipments and services are exported to over 60 countries,include America, Russia, India, Africa, Brazil, Chile,South Africa,Zambia etc. Sincerely welcome customers to visit our factory.
One Stop solution for beneficiation plant service
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design and equipment, we also provide the infrastructure design; Electrical and pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands
1.Strict machine inspection before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term.
Q: How about your machine quality?
){kind=link}